Skip to main content

Israel opens largest desalination plant of its kind


(Reuters) - An Israeli consortium unveiled the world's largest reverse osmosis desalination plant on Sunday in the coastal city of Hadera, hoping to help alleviate the arid country's water shortage.

Israel's H2ID, which is jointly owned by IDE Technologies and Shikun & Binue, said its plant will supply 127 million cubic meters of desalinated water a year, or about 20 percent of the yearly household consumption in Israel.

It is the third in a series of five desalination plants being built over the next few years that will eventually supply Israel with about 750 million cubic meters annually as traditional water sources dwindle with a rising population and low winter rainfalls.

The Hadera facility was the first to be funded almost entirely from foreign funds, said IDE CEO Avshalom Felber.

IDE Technologies, co-owned by Israel Chemicals and the Delek Group, said it raised most of the 1.6 billion shekels ($425 million) from European banks.

Bigger desalination plants can be found in Saudi Arabia, Felber said, which use a thermal-based technology to desalinate sea water. IDE's reverse osmosis technologies requires less energy and is friendlier to the environment, he said.

Israel's main sources of natural fresh water are underground aquifers and the Sea of Galilee, which has seen dangerously low levels due to overdrawing.

Shmulik Shai, CEO of H2ID, said the plant will supply water at the cost of $0.57 per cubic meter and will demand 450 gig watts of electricity each year.

IDE, or Israel Desalination Enterprises Technologies, has operations in 40 countries. Shikun & Binue is Israel's largest construction firm.
 
via: {reuters.com}

Comments

Popular posts from this blog

Difference Between : IC and EC Engine

Difference between internal combustion engine & external combustion engine is given below:

Comparison between : Otto & Diesel Cycle

Comparison of Otto and Diesel cycle is given below:

Difference Between : EN8 & MS Material

What is the difference between EN8 and MS material? Answer : EN 8  Material MS Material EN 8 material has higher tensile strength. MS material has comparatively low tensile strength. EN 8 material applicable when high strength required. MS material is applicable when high strength not required. EN 8 material contain 0.4% C MS material contain up to 0.25% C EN 8 material is use when other heat treatment process is carried out on it. MS material is use when no need of other heat treatment process on it. EN 8 material can use instead of MS material. MS material can not use instead of EN 8 material. Material is more expensive then MS. Material is less expensive then EN 8. Let me know if there is a addition of point or correction in any point.