Skip to main content

Create New First Part

As per previous post, I hope you already defined working directory.

To create a new part model, you have to follow below steps:


  • Click on New from Home Menu.
  • Select Part as Type and Solid as Sub-Type.
  • Define name of part. For example - Key_Handle.
Note:-
Software does not allow space between two words.
  • Clear the Use default template check box and click OK.







  • New dialog box New File Options is open.
  • Select mmns_part_solid as the template and then click OK.






Main Page - PTC CREO

To improve our knowledge then don't forget to give comment.

Also, give your suggestion addition or correction in detail.

Comments

Popular posts from this blog

Difference Between : IC and EC Engine

Difference between internal combustion engine & external combustion engine is given below:

Comparison between : Otto & Diesel Cycle

Comparison of Otto and Diesel cycle is given below:

Difference Between : EN8 & MS Material

What is the difference between EN8 and MS material? Answer : EN 8  Material MS Material EN 8 material has higher tensile strength. MS material has comparatively low tensile strength. EN 8 material applicable when high strength required. MS material is applicable when high strength not required. EN 8 material contain 0.4% C MS material contain up to 0.25% C EN 8 material is use when other heat treatment process is carried out on it. MS material is use when no need of other heat treatment process on it. EN 8 material can use instead of MS material. MS material can not use instead of EN 8 material. Material is more expensive then MS. Material is less expensive then EN 8. Let me know if there is a addition of point or correction in any point.