How to assign material to 3D model in PTC CREO

Hello Friends,

Here you will learn about "How to assign material to 3D model in PTC CREO?".

First of all open your model and then click on sequence shown in below image.

File > Prepare > Model Properties

After that doing this, below dialog box is open.

In this box, click on highlighted change.

One more dialog box is open.

Here inbuilt available material is shown. Now you have to choose required material for your model.

Follow steps to select material and then click on OK.

Now you can see the assign material name for your model.

Thanks For Taking Interest.

Enjoy 😃

Next lesson - How to calculate mass of 3D model in PTC CREO

Previous lesson - Revolve Feature - PTC Creo

Main Page - PTC CREO

To improve our knowledge then don't forget to give comment.

Also, give your suggestion addition or correction in detail.

Comments

Difference Between : IC and EC Engine

Difference between internal combustion engine & external combustion engine is given below:

Comparison between : Otto & Diesel Cycle

Comparison of Otto and Diesel cycle is given below:

Difference Between : EN8 & MS Material

What is the difference between EN8 and MS material? Answer : EN 8 Material MS Material EN 8 material has higher tensile strength. MS material has comparatively low tensile strength. EN 8 material applicable when high strength required. MS material is applicable when high strength not required. EN 8 material contain 0.4% C MS material contain up to 0.25% C EN 8 material is use when other heat treatment process is carried out on it. MS material is use when no need of other heat treatment process on it. EN 8 material can use instead of MS material. MS material can not use instead of EN 8 material. Material is more expensive then MS. Material is less expensive then EN 8. Let me know if there is a addition of point or correction in any point.

Mechanical Engineering & Documents

Search This Blog