Manufacturing Process : Casting

Casting is a manufacturing process in which liquid material is going to poured in mold/cavity, which is hollow cavity of desired shape and size and then give time to solidify. This solidification part is known as Casting.After solidification casting is pull out from mold/cavity for compete the process.

Types of Casting Process:

Sand Casting
Die Casting
Shell Mold Casting
Permanent Mold Casting
Investment Casting (Lost Wax Casting)
Lost-Foam Casting
Centrifugal Casting
Continuous Casting

Comments

Difference Between : IC and EC Engine

Difference between internal combustion engine & external combustion engine is given below:

Comparison between : Otto & Diesel Cycle

Comparison of Otto and Diesel cycle is given below:

Difference Between : EN8 & MS Material

What is the difference between EN8 and MS material? Answer : EN 8 Material MS Material EN 8 material has higher tensile strength. MS material has comparatively low tensile strength. EN 8 material applicable when high strength required. MS material is applicable when high strength not required. EN 8 material contain 0.4% C MS material contain up to 0.25% C EN 8 material is use when other heat treatment process is carried out on it. MS material is use when no need of other heat treatment process on it. EN 8 material can use instead of MS material. MS material can not use instead of EN 8 material. Material is more expensive then MS. Material is less expensive then EN 8. Let me know if there is a addition of point or correction in any point.

Mechanical Engineering & Documents

Search This Blog